Quick Answer
Calculate Axial Compressor or Turbine Blade Passing Frequency
Calculator
Need Equipment or a Supplier for This Project?
Use your calculation result to continue with equipment selection, supplier discovery, engineering support, or project evaluation.
Find Engineering Solutions →Result Interpretation
Axial Compressor or Turbine Blade Passing Frequency calculator computes Blade Passing Frequency in Hz using the defined engineering formula and the input values provided. Blade Passing Frequency is expressed in Hz. No universal acceptance threshold is defined by this calculator.
Worked Example
Verified calculation
Given:
- Rotational Speed = 10000
- Number of Blades = 24
Expected Result:
- Blade Passing Frequency = 4000
Engineering Interpretation:
Under the given input conditions, the calculated result is: Blade Passing Frequency = 4000 Hz.
The actual numerical result is computed by the Runtime engine using the persisted tool definition. The values shown here come from deterministically validated test cases.
Formula / Method
blade passing frequency = rotational speed * number of blades / 60.0Formula family: formula_rotating_blade_passing_frequency_calculator_axial_compressor_or_turbine
Variables
| Symbol | Label | Role | Description |
|---|---|---|---|
| rotational_speed_rpm | Rotational Speed | INPUT | Rotational Speed |
| number_of_blades | Number of Blades | INPUT | Number of Blades |
| blade_passing_frequency | Blade Passing Frequency | OUTPUT | Blade Passing Frequency |
Calculation Steps
- Enter the rotational speed in min^-1.
- Enter the number of blades in 1.
- Step 1: Compute blade passing frequency.
- Read the blade passing frequency (Hz) from the results.
Engineering Summary
Calculate Axial Compressor or Turbine Blade Passing Frequency
Frequently Asked Questions
What does this calculator calculate?
The Axial Compressor or Turbine Blade Passing Frequency calculator estimates Blade Passing Frequency based on the input parameters you provide
Why is rotational speed important in this calculation?
rotational speed is directly proportional to blade passing frequency. When you enter rotational speed in min^-1, the calculator uses it in the engineering formula to compute the output
How should I interpret the result blade passing frequency?
The calculator outputs blade passing frequency in Hz. The result is computed directly from the input values using the defined engineering formula
What units should I use for the inputs?
Enter each value in the units shown next to the input field: Rotational Speed (min^-1). Make sure all inputs use the specified units for consistent results
What assumptions does this calculator use?
This calculator uses automatically validated engineering formulas. Results are approximate and should be validated against site-specific conditions, applicable codes, and professional engineering judgment
Related Tools
Bearing Eccentricity Ratio (Classical Reynolds, Short-Bearing Approximation) calculator
Single-Disk Rotor Unbalance Vibration Amplitude (Rigid Support, Damped SDO Forced Vibration) calculator
Axial Compressor Blade Passing Frequency Calculator
API RP 686 Critical Speed Margin Percentage for Centrifugal Compressor Rotors calculator
Centrifugal Compressor Rotor Critical Speed (API 617) calculator
Centrifugal Compressor Surge Margin (Pressure Ratio Method) calculator
Browse More Tools
Explore the full index of engineering calculators on this vertical site.